SLEEVE CLEANER DIRECT ENGRAVING
Automatic sleeve washout equipment with direct engraving
FEATURES
- The washout system works through a cylindrical brush, automatically adapted to the cylinder surface
- Rinsing with high pressure water
- Compressed air drying
- Working steps are: Washout time with chemical products, Rinsing time, Drying time
- Solvent charge and discharge through a pump
- Filter for solvent to retain ink
- Extractable tank, which allow an accurate cleaning
Optional:
- Cylinder with sticky plate to clean plate photopolymers
| 120 | 150 | 200 | 300 | |
| Minimum sleeve diameter (mm) | 90 | 90 | 90 | 90 |
| Minimum sleeve diameter (inches) | 3'' | 3'' | 3'' | 3'' |
| Maximum sleeve diameter (mm) | 320 | 350 | 350 | 350 |
| Maximum sleeve diameter (inches) | 12 | 13 | 13 | 13 |
| Tank capacity (l) | 45 | 45 | 45 | 45 |
| Wattage (kW) | 2 | 2 | 2 | 5 |
| Electrical supply | 230V (1PH+N+GND) 50/60Hz | |||
| Overall size (LxWxH) (cm) |
168x79x130 | 198x79x130 | 250x79x130 | 390x101x120 |
| Weight (kgs) | 300 | 350 | 400 | 700 |